Soontrue Machinery Automatic Chocolate Chunk Potato Chips Snack Food Packaging Machinery

 ModelSZ180(3 servo)Bagging size rangeL60-300mmW35-160mmH5-50mmPacking speed30-300bags/min.Packing film width90-400mmGeneral power5 kwFilm material1Ph. 220V 50HzPower supply type400KgMachine weight4000 x 930 x 1370mm IntroductionSZ180 horizontal flow wrap machine is ideal for suppliers of products that must be pac

Featured Products

 

Soontrue Machinery Fully Automatic Chocolate Block Chip Snack Food Packaging Machinery

Soontrue Machinery Fully Automatic Chocolate Block Chip Snack Food Packaging Machinery

Model

SZ180

(3 servo)

Bagging size range

L60-300mm

W35-160mm

H5-50mm

Packing speed

30-300bags/min.

Packing film width

90-400mm

General power

5 kw

Film material

1Ph. 220V 50Hz

Power supply type

400Kg

Machine weight

4000 x 930 x 1370mm

 

Introduction

SZ180 horizontal flow wrap machine is ideal for suppliers of products that must be packaged individually. Flow wrapping is a horizontal packaging process in which product enters the machinery and is wrapped in clear or printed film. The result is a tightly fitted flexible package with a horizontal back seal and end seal.

Application:

Bakery products:

Biscuits

Brownies

Cookies

Crackers

Croissants

Muffins

Cake

Cup cake

Bread

Bun

toaster pastries

Hamburger

Pancakes

Sandwiches

Wafer

Waffle

Bar products

Breakfast bars

Candy bars

Chocolate bars

Crisped rice bars

Energy bars

Nutrition bars

Noodle:

Instant noodle

Rice noodle

Daily necessities

Napkin tissue

Toilet paper

Soap

Washing sponge

Product with tray

Applicable Industry

Food & Beverage Factory

Retail

Food Shop

Food & Beverage Shops

SZ Series Full Servo-control Packaging Machine Features

Simple system structure: System is composed by servo motors, servo driver and touch screen. Servo driver is built-in motion control formula of packaging machine without any independent controller, all wiring is connector assembly. Performance of compact design, convenient maintaining and competitive price.

Simple operation: With intelligent control system of HMI, it gets simple parameters setting and adjustment.

Big bagging size range: Bag length can be set from 60mm to 600mm via color mark tracking or bag length presetting. To set bag length is much easier and flexible.

Shaftless driving: Adopt shaftless driving technology among 3 shafts, no mechanical joint, each shaft is controlled by servo motor with gear reducer.

Auto-shift cutter: Cutter is running with variable shift, speed curve is generated automatically without manual adjustment, and save mechanical cams.

Faster line speed: Max. line speed is up to 50m/min., long package can be packed faster.

Faster packing speed: With color mark tracking function, max. packing speed can be up to 200bags/min(Double jaws).

High accuracy of color mark tracking: Color mark tracking accuracy is up to 0.1mm

Packless function: With this function, no matter when in-feed products are continuous or intermittent, each package will has product inside and no empty bag, so as to reduce loss of film material.

Cutless function: With this function, if sensor detects any product is out of position inside film, cutter will stop and restart until this product is discharged.

Film splicer: Finished film roll will be spliced new film roll automatically by film splicer without machine stop, so as to save operation time and labor.

Cutter torque protection: System detects stress condition of cutter automatically. When hard product is being cutting, resistance is bigger than preset value of torque protection, cutter will stop immediately and run backward, machine can be restarted until this cutting product is discharged without restoration. Value of torque protection is set via touch screen randomly.

Customizable special function: Machine can be modified according to customer's requirement. The whole machine is applied with multiple safety protection devices, which can be equipped with various automatic feeding system.

 

SZ180 Machine Standard features

Sanitary machine design allows for easy clean-up

Slim machine body for saving packing room

Intelligent control system with 3 servo motors

Color mark tracking

Machine can easily be integrated with Soontrue's full line of automatic feeding  system and other upstream or downstream equipment

 

Optional auxiliary equipment/function

Date printer - Ink roll printer, thermal transfer printer, ink jet printer

Labeling machine

Nitrogen generator

Metal detector

Weight detector

Multi-head weigher

Deoxidizer sachet feeder

Seasoning sachet feeder

Multi-language interface

Visual Identity System

Gusset device

Anti-empty bag function

.......

Any other customized function

 

Maintenance and inspection

1. Maintenance and clean for machine every day or every shift.

(1) Clean the machine each time after packaging.

(2) Turn off the power before cleaning the machine to low the temperature of heating part.

(3) Never spray the water or steam directly on the machine when cleaning.

(4) Main components to be cleaned:

*Remove the product chips store up in the conveyance line of the product by compressed air or in other way.

*Brush off the film chips adhered to the sealing surface by the wire brush applied with the silicone oil.

*Clear the dirt on the control panel, safety cover and operating surface by a piece of soft cloth.

*Conductive ring of the mid sealing tool and end sealers: clean it once a week or two weeks. Clean the conductive ring by the back of the sandpaper with the master power off.

 

2. Maintenance and clean for machine every month.

(1) Apply the lubricating grease on the bearing of the end sealers.

(2) Apply the lubricating grease on the gear and chain (pulley) of the driving unit.

(3) Check the tightness of the chain and belt of the driving unit, and tighten the loosed one.

(4)Check the tightness of the fastening screw or nut of all parts, and tighten the loosed one.

 

3. Relevant inspection for machine once a half year.

(1) Check the wear intensity of the belt of the driving unit, and replace the worn-out one.  

(2)  Check the wear intensity of the rubber roller, and replace the one affecting the film advancing effect.

(3) Properly adjust the brake unit of the film-carrying roller.

(4)  Check all wearing parts, and immediately replace the damaged one.

(5) Check the fastness of the wiring on the electrical terminal plate, and tighten the loosed one. Check the inverter, programmable controller and circuit board, and remove the dust or dirt on them by the compressed air.

 

4. Maintenance and clean for machine every day or every shift.

(1) Clean the machine each time after packaging.

(2) Turn off the power before cleaning the machine to low the temperature of heating part.

(3) Never spray the water or steam directly on the machine when cleaning.

(4) Main components to be cleaned:

*Remove the product chips store up in the conveyance line of the product by compressed air or in other way.

*Brush off the film chips adhered to the sealing surface by the wire brush applied with the silicone oil.

*Clear the dirt on the control panel, safety cover and operating surface by a piece of soft cloth.

*Conductive ring of the mid sealing tool and end sealers: clean it once a week or two weeks. Clean the conductive ring by the back of the sandpaper with the master power off.

 

5. Maintenance and clean for machine every month.

(1) Apply the lubricating grease on the bearing of the end sealers.

(2) Apply the lubricating grease on the gear and chain (pulley) of the driving unit.

(3) Check the tightness of the chain and belt of the driving unit, and tighten the loosed one.

(4)Check the tightness of the fastening screw or nut of all parts, and tighten the loosed one.

 

6. Relevant inspection for machine once a half year.

(6) Check the wear intensity of the belt of the driving unit, and replace the worn-out one.  

(7)  Check the wear intensity of the rubber roller, and replace the one affecting the film advancing effect.

(8) Properly adjust the brake unit of the film-carrying roller.

(9)  Check all wearing parts, and immediately replace the damaged one.

Check the fastness of the wiring on the electrical terminal plate, and tighten the loosed one. Check the inverter, programmable controller and circuit board, and remove the dust or dirt on them by the compressed air.

company information

Soontrue Machinery Fully Automatic Chocolate Block Chip Snack Food Packaging Machinery

Foshan Soontrue Machinery Equipment Co., Ltd, established in 1993, is a leading manufacturer engaged in the research & development, production, sales and service of horizontal packaging machine, vertical packaging machine and fully automatic packing system, which are mainly applicable in bakery industry. With more than 26 years continuous innovation and development, the Soontrue machines quality are up to high level, which obtains trust from domestic and overseas customers from Asia, Africa, the U.S.A and Europe. You are welcome to visit Foshan Soontrue factory to witness the product diversity.

transport&FAQ

Soontrue Machinery Fully Automatic Chocolate Block Chip Snack Food Packaging Machinery

1.How can I get the price?

-We usually quote within 24 hours after we get your inquiry(Except weekend and holidays).
-If you are very urgent to get the price, please email us or contact us in other ways so that we can offer you a quote.

2. Can I buy samples placing orders?

-Yes.Please feel free to contact us.

3.What is your lead time?

-It depends on the order quantity and the season you place the order.
-Usually we can ship within 7-15 days for small quantity, and about 30 days for large quantity.

4.What is your payment term?

-T/T,Western Union,MoneyGram,and Paypal.This is negotiable.

5.What is the shipping method?

-It could be shipped by sea,by air or by express(EMS,UPS,DHL,TNT,FEDEX and ect).
Please confirm with us before placing orders.

6.How do you make our business long-term and good relationship?

-1. We keep good quality and competitive price to ensure our customers benefit ;
-2. We respect every customer as our friend and we sincerely do business and make friends with them,no matter where they come from.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours